Storefront glass doors, back doors that take deliveries, and an office suite with too many keys floating around all have simple fixes. We rekey, repair closers and pivots, install exit devices where a crowd must leave in one motion, and keep your key list manageable.
Open 24/7 · Barrie
Tap the closest match.
Storefront glass doors, back doors that take deliveries, and an office suite with too many keys floating around all have simple fixes. We rekey, repair closers and pivots, install exit devices where a crowd must leave in one motion, and keep your key list manageable.
Our habit is to explain as we go. You will hear why the strike is being moved, what the new pins do, and which of the three keys on the counter is the one that now opens everything. It slows the job by a few minutes and it means you leave the visit understanding your own door, which we think is part of the service.
The key you reach for. The door you come home to. Good locksmith work begins with understanding how you use them.
34years in business
24/7open every day
Locksmith services
Security should feel like a settled question, not a nagging one. These services exist to get you there: doors that lock without a wrestle, keys that only the right people hold, and hardware chosen for how you actually use the building rather than a catalogue picture.
Home Lockout ServiceThe moving truck has left, half the boxes are inside, and the single key the previous owner handed over turns the knob but not the deadbolt.
Business Lockout ServiceYou signed the lease on the unit last week and the landlord handed over possession, but the previous tenant's locks are still on both doors and no keys came with them.
Broken Key ExtractionThe padlock on the shed has been stiff all summer.
Break-In Damage Lock RepairThere is a hole where the cylinder used to be.
Seized & Jammed Lock OpeningYou are inside, the deadbolt is thrown, and the thumb-turn will not budge.
Lost Keys — Same-Visit RekeyThe keys fell out of a gym bag somewhere between the arena and the parking lot.
Lock RekeyingThe builder handed over your new home with a stack of identical keys, and you know the framing crew, the painters and the flooring installers all used a construction key during the build.
Deadbolt InstallationThe old deadbolt has grown lazy.
Lock Replacement & UpgradeThe house is fifteen years old and every exterior door still wears the light hardware the builder fitted: a short bolt, a thin strike held by two small screws, and a knob lock that never suited a street entrance.
Vintage Mortise Lock ServiceThe key turns freely in the round cylinder on the door, all the way around and back, without the bolt shifting at all.
Smart Lock InstallationThe kids get home before you do and the spare key has been lost twice this school year.
Gate & Building Entry LocksSomeone pried at the gate latch overnight, and now the strike plate hangs by one screw and the cylinder spins loose in its housing.
Mailbox Lock ReplacementThe mailbox key snapped clean off in the lock last week, and the stub is still sitting somewhere inside the cylinder.
You reached the front step with the groceries, patted every pocket twice, and the house key is simply not there. It was on the ring this morning. Now the door is locked, the lights are off, and nothing you have on you opens it.
Home Lockout ServiceThree teenagers, a dog walker, a cleaner and one house key that keeps going missing. You are tired of cutting copies and would rather give each person a code you can switch off, with a proper deadbolt behind it.
Lock Replacement & UpgradeYour basement tenant has given notice, and a new one arrives on the first. The lock on the separate entrance works perfectly well. You simply want a fresh key for the incoming tenant and for the old one to be retired.
Lock RekeyingHigh security
A lock's rating comes down to how long it holds against a skilled attacker with tools. Doors are only as good as their frames. High security work respects both facts, hardening the cylinder and the assembly around it at the same time.
The restricted keys you bought years ago are no longer restricted; the locksmith mentioned the patent has run out and blanks are sold openly.
The house is fifteen years old and every exterior door still wears the light hardware the builder fitted: a short bolt, a thin strike held by two small screws, and a knob lock that never suited a street entrance.
The old deadbolt has grown lazy.
There is a hole where the cylinder used to be.
Commercial
Restaurants, clinics, offices, shops, garages and storage units each wear out hardware differently. Commercial lock replacement is about matching the grade of the lock to the traffic through the door, and the pages here describe how we make that match.
High security
Pry marks circle the dial after an overnight break-in attempt, and the safe now refuses every number that used to open it, as if something inside has locked itself down.
The till drawer has been holding two days of cash because the new shop never got a proper safe, and a locked drawer under the counter is the only thing standing between that cash and anyone who works late.
Sensible optionClean and lubricate the cylinder.
WhyMoisture and old grease thicken below freezing; a cold-rated lubricant keeps the pins moving.
Sensible optionAdjust the strike and hinges for seasonal movement.
WhyFrames shift with freeze-thaw; a strike set for the cold months keeps the door locking year round.
Sensible optionThaw it properly, then seal against water getting in.
WhyForcing a frozen cylinder snaps keys; gentle heat frees it, and a weather cover keeps the water out afterwards.
Sensible optionLost Keys — Same-Visit Rekey
WhyA missing key is also the moment a household can stop carrying four.
Sensible optionLock Rekeying
WhyFor landlords and tenants, rekeying is the tidy way to handle a change of occupancy.
Sensible optionDeadbolt Installation
WhySteel-clad and fibreglass doors, the common insulated entry doors in newer subdivisions, take a deadbolt happily as long as they are cut for it properly.
Describe the property, the hardware and what has changed, and the visit starts from what you have seen.
01
Mailbox, cabinet and desk locks are small but varied. We identify the type and whether a key can be made, a cylinder replaced or the whole unit swapped.
02
Most small locks are replaced rather than repaired because new parts are simpler than rebuilding tiny mechanisms. We fit the new cylinder and check the cam lines up with the catch.
03
You get a tested key plus a spare, and a tip about where to keep it, because a mailbox key is the one people lose most.
Simcoe, Ontario
2021 Census
About 29% of homes in Barrie were built in 1980 or earlier, according to the 2021 Census.
Where most homes are recent, the doors themselves are sound and the work is mostly about keys and control: who holds them, whether contractor keys were retired, and whether one key can open everything. The visit is often more conversation than drilling.
Single-detached houses make up about 58% of homes in Barrie (2021 Census).
Where housing is mixed, the same street can hold a solid wood front door, a steel townhouse door and a metal-clad suite door. A locksmith fits each with hardware suited to its construction, so every neighbour ends up with a door that locks properly.
Entry comes first and repairs second. Once authority is confirmed the door is opened, staff go in and start their routine, and the locksmith turns to the cause: extracting a broken key, rekeying for a lost one, re-springing a deadlatch or lifting a dropped door. Anything that can wait for a quieter hour, such as rekeying interior doors, is offered as a return visit so the shop floor is not blocked while it trades.
On the day, the cylinder is thawed with lock de-icer or gentle warmth, never hot water or a flame near aluminium, and dried before a moisture-shedding dry lubricant goes in. To stop the pattern, the keyway gets a cover on the most exposed door, salt is kept off the bottom rail, and the closer is adjusted for cold fluid so the door still latches. A cylinder that freezes yearly may be better placed or shielded.
It depends on the hardware and what else is wired to it. A standard storefront cylinder or office lever on a well-hung door is often a short job once authority is confirmed. A high-security cylinder, a frozen lock, a dropped door or a dead access controller adds time, and so does rekeying several doors afterwards. The locksmith gives you a realistic idea on the phone once you describe the door and the situation.
It depends on what you have. If the deadbolt is a good heavy unit that throws a full inch into a proper strike, a high security cylinder can replace the ordinary one and the rest stays. If the deadbolt is light, worn or throws a short bolt, a new graded deadbolt with a hardened bolt is the sensible base and the high security cylinder goes into that. The assessment tells you which, door by door.
Every job in Barrie starts with a proper look before anyone touches a tool. The locksmith checks the cylinder, the latch, the strike and the way the door sits in its frame, then tells you what he found and what he suggests. The price is given at the door once that look is done, so it reflects the actual hardware rather than a guess, and it is the same fee at any hour.
